[−][src]Struct futures_util::sink::Fanout
Sink that clones incoming items and forwards them to two sinks at the same time.
Backpressure from any downstream sink propagates up, which means that this sink can only process items as fast as its slowest downstream sink.
Methods
impl<Si1: Sink, Si2: Sink> Fanout<Si1, Si2>[src]
impl<Si1: Sink, Si2: Sink> Fanout<Si1, Si2>pub fn into_inner(self) -> (Si1, Si2)[src]
pub fn into_inner(self) -> (Si1, Si2)Consumes this combinator, returning the underlying sinks.
Note that this may discard intermediate state of this combinator, so care should be taken to avoid losing resources when this is called.
Trait Implementations
impl<Si1: Sink + Debug, Si2: Sink + Debug> Debug for Fanout<Si1, Si2> where
Si1::SinkItem: Debug,
Si2::SinkItem: Debug, [src]
impl<Si1: Sink + Debug, Si2: Sink + Debug> Debug for Fanout<Si1, Si2> where
Si1::SinkItem: Debug,
Si2::SinkItem: Debug, impl<Si1, Si2> Sink for Fanout<Si1, Si2> where
Si1: Sink,
Si1::SinkItem: Clone,
Si2: Sink<SinkItem = Si1::SinkItem, SinkError = Si1::SinkError>, [src]
impl<Si1, Si2> Sink for Fanout<Si1, Si2> where
Si1: Sink,
Si1::SinkItem: Clone,
Si2: Sink<SinkItem = Si1::SinkItem, SinkError = Si1::SinkError>, type SinkItem = Si1::SinkItem
The type of value that the sink accepts.
type SinkError = Si1::SinkError
The type of value produced by the sink when an error occurs.
fn poll_ready(
self: Pin<&mut Self>,
lw: &LocalWaker
) -> Poll<Result<(), Self::SinkError>>[src]
fn poll_ready(
self: Pin<&mut Self>,
lw: &LocalWaker
) -> Poll<Result<(), Self::SinkError>>fn start_send(
self: Pin<&mut Self>,
item: Self::SinkItem
) -> Result<(), Self::SinkError>[src]
fn start_send(
self: Pin<&mut Self>,
item: Self::SinkItem
) -> Result<(), Self::SinkError>fn poll_flush(
self: Pin<&mut Self>,
lw: &LocalWaker
) -> Poll<Result<(), Self::SinkError>>[src]
fn poll_flush(
self: Pin<&mut Self>,
lw: &LocalWaker
) -> Poll<Result<(), Self::SinkError>>fn poll_close(
self: Pin<&mut Self>,
lw: &LocalWaker
) -> Poll<Result<(), Self::SinkError>>[src]
fn poll_close(
self: Pin<&mut Self>,
lw: &LocalWaker
) -> Poll<Result<(), Self::SinkError>>Auto Trait Implementations
impl<Si1, Si2> Send for Fanout<Si1, Si2> where
Si1: Send,
Si2: Send,
impl<Si1, Si2> Send for Fanout<Si1, Si2> where
Si1: Send,
Si2: Send, impl<Si1, Si2> Sync for Fanout<Si1, Si2> where
Si1: Sync,
Si2: Sync,
impl<Si1, Si2> Sync for Fanout<Si1, Si2> where
Si1: Sync,
Si2: Sync, Blanket Implementations
impl<T> SinkExt for T where
T: Sink + ?Sized, [src]
impl<T> SinkExt for T where
T: Sink + ?Sized, fn with<U, Fut, F, E>(self, f: F) -> With<Self, U, Fut, F> where
F: FnMut(U) -> Fut,
Fut: Future<Output = Result<Self::SinkItem, E>>,
E: From<Self::SinkError>,
Self: Sized, [src]
fn with<U, Fut, F, E>(self, f: F) -> With<Self, U, Fut, F> where
F: FnMut(U) -> Fut,
Fut: Future<Output = Result<Self::SinkItem, E>>,
E: From<Self::SinkError>,
Self: Sized, Composes a function in front of the sink. Read more
fn with_flat_map<U, St, F>(self, f: F) -> WithFlatMap<Self, U, St, F> where
F: FnMut(U) -> St,
St: Stream<Item = Result<Self::SinkItem, Self::SinkError>>,
Self: Sized, [src]
fn with_flat_map<U, St, F>(self, f: F) -> WithFlatMap<Self, U, St, F> where
F: FnMut(U) -> St,
St: Stream<Item = Result<Self::SinkItem, Self::SinkError>>,
Self: Sized, Composes a function in front of the sink. Read more
fn sink_map_err<E, F>(self, f: F) -> SinkMapErr<Self, F> where
F: FnOnce(Self::SinkError) -> E,
Self: Sized, [src]
fn sink_map_err<E, F>(self, f: F) -> SinkMapErr<Self, F> where
F: FnOnce(Self::SinkError) -> E,
Self: Sized, Transforms the error returned by the sink.
fn sink_err_into<E>(self) -> SinkErrInto<Self, E> where
Self: Sized,
Self::SinkError: Into<E>, [src]
fn sink_err_into<E>(self) -> SinkErrInto<Self, E> where
Self: Sized,
Self::SinkError: Into<E>, Map this sink's error to a different error type using the Into trait. Read more
fn buffer(self, capacity: usize) -> Buffer<Self> where
Self: Sized, [src]
fn buffer(self, capacity: usize) -> Buffer<Self> where
Self: Sized, Adds a fixed-size buffer to the current sink. Read more
fn close(&mut self) -> Close<Self> where
Self: Unpin, [src]
fn close(&mut self) -> Close<Self> where
Self: Unpin, Close the sink.
fn fanout<Si>(self, other: Si) -> Fanout<Self, Si> where
Self: Sized,
Self::SinkItem: Clone,
Si: Sink<SinkItem = Self::SinkItem, SinkError = Self::SinkError>, [src]
fn fanout<Si>(self, other: Si) -> Fanout<Self, Si> where
Self: Sized,
Self::SinkItem: Clone,
Si: Sink<SinkItem = Self::SinkItem, SinkError = Self::SinkError>, Fanout items to multiple sinks. Read more
fn flush(&mut self) -> Flush<Self> where
Self: Unpin, [src]
fn flush(&mut self) -> Flush<Self> where
Self: Unpin, Flush the sync, processing all pending items. Read more
fn send(&mut self, item: Self::SinkItem) -> Send<Self> where
Self: Unpin, [src]
fn send(&mut self, item: Self::SinkItem) -> Send<Self> where
Self: Unpin, A future that completes after the given item has been fully processed into the sink, including flushing. Read more
fn send_all<'a, St>(&'a mut self, stream: &'a mut St) -> SendAll<'a, Self, St> where
St: Stream<Item = Self::SinkItem> + Unpin,
Self: Unpin, [src]
fn send_all<'a, St>(&'a mut self, stream: &'a mut St) -> SendAll<'a, Self, St> where
St: Stream<Item = Self::SinkItem> + Unpin,
Self: Unpin, A future that completes after the given stream has been fully processed into the sink, including flushing. Read more
ⓘImportant traits for Either<L, R>fn left_sink<Si2>(self) -> Either<Self, Si2> where
Si2: Sink<SinkItem = Self::SinkItem, SinkError = Self::SinkError>,
Self: Sized, [src]
fn left_sink<Si2>(self) -> Either<Self, Si2> where
Si2: Sink<SinkItem = Self::SinkItem, SinkError = Self::SinkError>,
Self: Sized, Wrap this sink in an Either sink, making it the left-hand variant of that Either. Read more
ⓘImportant traits for Either<L, R>fn right_sink<Si1>(self) -> Either<Si1, Self> where
Si1: Sink<SinkItem = Self::SinkItem, SinkError = Self::SinkError>,
Self: Sized, [src]
fn right_sink<Si1>(self) -> Either<Si1, Self> where
Si1: Sink<SinkItem = Self::SinkItem, SinkError = Self::SinkError>,
Self: Sized, Wrap this stream in an Either stream, making it the right-hand variant of that Either. Read more
ⓘImportant traits for Compat<R>fn compat(self) -> Compat<Self> where
Self: Sized + Unpin, [src]
fn compat(self) -> Compat<Self> where
Self: Sized + Unpin, impl<T> From for T[src]
impl<T> From for Timpl<T, U> Into for T where
U: From<T>, [src]
impl<T, U> Into for T where
U: From<T>, impl<T, U> TryFrom for T where
T: From<U>, [src]
impl<T, U> TryFrom for T where
T: From<U>, type Error = !
try_from)The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>[src]
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>impl<T> Borrow for T where
T: ?Sized, [src]
impl<T> Borrow for T where
T: ?Sized, impl<T> Any for T where
T: 'static + ?Sized, [src]
impl<T> Any for T where
T: 'static + ?Sized, fn get_type_id(&self) -> TypeId[src]
fn get_type_id(&self) -> TypeIdimpl<T, U> TryInto for T where
U: TryFrom<T>, [src]
impl<T, U> TryInto for T where
U: TryFrom<T>, type Error = <U as TryFrom<T>>::Error
try_from)The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>[src]
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>impl<T> BorrowMut for T where
T: ?Sized, [src]
impl<T> BorrowMut for T where
T: ?Sized, ⓘImportant traits for &'_ mut Ifn borrow_mut(&mut self) -> &mut T[src]
fn borrow_mut(&mut self) -> &mut T