Enum either::Either

pub enum Either<L, R> {
    Left(L),
    Right(R),
}

The enum Either with variants Left and Right is a general purpose sum type with two cases.

The Either type is symmetric and treats its variants the same way, without preference. (For representing success or error, use the regular Result enum instead.)

Variants

Left(L)

A value of type L.

Right(R)

A value of type R.

Methods

impl<L, R> Either<L, R>

pub fn is_left(&self) -> bool

Return true if the value is the Left variant.

use either::*;

let values = [Left(1), Right("the right value")];
assert_eq!(values[0].is_left(), true);
assert_eq!(values[1].is_left(), false);

pub fn is_right(&self) -> bool

Return true if the value is the Right variant.

use either::*;

let values = [Left(1), Right("the right value")];
assert_eq!(values[0].is_right(), false);
assert_eq!(values[1].is_right(), true);

pub fn left(self) -> Option<L>

Convert the left side of Either<L, R> to an Option<L>.

use either::*;

let left: Either<_, ()> = Left("some value");
assert_eq!(left.left(),  Some("some value"));

let right: Either<(), _> = Right(321);
assert_eq!(right.left(), None);

pub fn right(self) -> Option<R>

Convert the right side of Either<L, R> to an Option<R>.

use either::*;

let left: Either<_, ()> = Left("some value");
assert_eq!(left.right(),  None);

let right: Either<(), _> = Right(321);
assert_eq!(right.right(), Some(321));

Important traits for Either<L, R>

impl<L, R> Iterator for Either<L, R> where
    L: Iterator,
    R: Iterator<Item = L::Item>,  type Item = L::Item;impl<L, R> Read for Either<L, R> where
    L: Read,
    R: Read, impl<L, R> Write for Either<L, R> where
    L: Write,
    R: Write, 

pub fn as_ref(&self) -> Either<&L, &R>

Convert &Either<L, R> to Either<&L, &R>.

use either::*;

let left: Either<_, ()> = Left("some value");
assert_eq!(left.as_ref(), Left(&"some value"));

let right: Either<(), _> = Right("some value");
assert_eq!(right.as_ref(), Right(&"some value"));

Important traits for Either<L, R>

impl<L, R> Iterator for Either<L, R> where
    L: Iterator,
    R: Iterator<Item = L::Item>,  type Item = L::Item;impl<L, R> Read for Either<L, R> where
    L: Read,
    R: Read, impl<L, R> Write for Either<L, R> where
    L: Write,
    R: Write, 

pub fn as_mut(&mut self) -> Either<&mut L, &mut R>

Convert &mut Either<L, R> to Either<&mut L, &mut R>.

use either::*;

fn mutate_left(value: &mut Either<u32, u32>) {
    if let Some(l) = value.as_mut().left() {
        *l = 999;
    }
}

let mut left = Left(123);
let mut right = Right(123);
mutate_left(&mut left);
mutate_left(&mut right);
assert_eq!(left, Left(999));
assert_eq!(right, Right(123));

Important traits for Either<L, R>

impl<L, R> Iterator for Either<L, R> where
    L: Iterator,
    R: Iterator<Item = L::Item>,  type Item = L::Item;impl<L, R> Read for Either<L, R> where
    L: Read,
    R: Read, impl<L, R> Write for Either<L, R> where
    L: Write,
    R: Write, 

pub fn flip(self) -> Either<R, L>

Convert Either<L, R> to Either<R, L>.

use either::*;

let left: Either<_, ()> = Left(123);
assert_eq!(left.flip(), Right(123));

let right: Either<(), _> = Right("some value");
assert_eq!(right.flip(), Left("some value"));

Important traits for Either<L, R>

impl<L, R> Iterator for Either<L, R> where
    L: Iterator,
    R: Iterator<Item = L::Item>,  type Item = L::Item;impl<L, R> Read for Either<L, R> where
    L: Read,
    R: Read, impl<L, R> Write for Either<L, R> where
    L: Write,
    R: Write, 

pub fn map_left<F, M>(self, f: F) -> Either<M, R> where     F: FnOnce(L) -> M,

Apply the function f on the value in the Left variant if it is present rewrapping the result in Left.

use either::*;

let left: Either<_, u32> = Left(123);
assert_eq!(left.map_left(|x| x * 2), Left(246));

let right: Either<u32, _> = Right(123);
assert_eq!(right.map_left(|x| x * 2), Right(123));

Important traits for Either<L, R>

impl<L, R> Iterator for Either<L, R> where
    L: Iterator,
    R: Iterator<Item = L::Item>,  type Item = L::Item;impl<L, R> Read for Either<L, R> where
    L: Read,
    R: Read, impl<L, R> Write for Either<L, R> where
    L: Write,
    R: Write, 

pub fn map_right<F, S>(self, f: F) -> Either<L, S> where     F: FnOnce(R) -> S,

Apply the function f on the value in the Right variant if it is present rewrapping the result in Right.

use either::*;

let left: Either<_, u32> = Left(123);
assert_eq!(left.map_right(|x| x * 2), Left(123));

let right: Either<u32, _> = Right(123);
assert_eq!(right.map_right(|x| x * 2), Right(246));

pub fn either<F, G, T>(self, f: F, g: G) -> T where     F: FnOnce(L) -> T,     G: FnOnce(R) -> T,

Apply one of two functions depending on contents, unifying their result. If the value is Left(L) then the first function f is applied; if it is Right(R) then the second function g is applied.

use either::*;

fn square(n: u32) -> i32 { (n * n) as i32 }
fn negate(n: i32) -> i32 { -n }

let left: Either<u32, i32> = Left(4);
assert_eq!(left.either(square, negate), 16);

let right: Either<u32, i32> = Right(-4);
assert_eq!(right.either(square, negate), 4);

pub fn either_with<Ctx, F, G, T>(self, ctx: Ctx, f: F, g: G) -> T where     F: FnOnce(Ctx, L) -> T,     G: FnOnce(Ctx, R) -> T,

Like either, but provide some context to whichever of the functions ends up being called.

// In this example, the context is a mutable reference
use either::*;

let mut result = Vec::new();

let values = vec![Left(2), Right(2.7)];

for value in values {
    value.either_with(&mut result,
                      |ctx, integer| ctx.push(integer),
                      |ctx, real| ctx.push(f64::round(real) as i32));
}

assert_eq!(result, vec![2, 3]);

Important traits for Either<L, R>

impl<L, R> Iterator for Either<L, R> where
    L: Iterator,
    R: Iterator<Item = L::Item>,  type Item = L::Item;impl<L, R> Read for Either<L, R> where
    L: Read,
    R: Read, impl<L, R> Write for Either<L, R> where
    L: Write,
    R: Write, 

pub fn left_and_then<F, S>(self, f: F) -> Either<S, R> where     F: FnOnce(L) -> Either<S, R>,

Apply the function f on the value in the Left variant if it is present.

use either::*;

let left: Either<_, u32> = Left(123);
assert_eq!(left.left_and_then::<_,()>(|x| Right(x * 2)), Right(246));

let right: Either<u32, _> = Right(123);
assert_eq!(right.left_and_then(|x| Right::<(), _>(x * 2)), Right(123));

Important traits for Either<L, R>

impl<L, R> Iterator for Either<L, R> where
    L: Iterator,
    R: Iterator<Item = L::Item>,  type Item = L::Item;impl<L, R> Read for Either<L, R> where
    L: Read,
    R: Read, impl<L, R> Write for Either<L, R> where
    L: Write,
    R: Write, 

pub fn right_and_then<F, S>(self, f: F) -> Either<L, S> where     F: FnOnce(R) -> Either<L, S>,

Apply the function f on the value in the Right variant if it is present.

use either::*;

let left: Either<_, u32> = Left(123);
assert_eq!(left.right_and_then(|x| Right(x * 2)), Left(123));

let right: Either<u32, _> = Right(123);
assert_eq!(right.right_and_then(|x| Right(x * 2)), Right(246));

Important traits for Either<L, R>

impl<L, R> Iterator for Either<L, R> where
    L: Iterator,
    R: Iterator<Item = L::Item>,  type Item = L::Item;impl<L, R> Read for Either<L, R> where
    L: Read,
    R: Read, impl<L, R> Write for Either<L, R> where
    L: Write,
    R: Write, 

pub fn into_iter(self) -> Either<L::IntoIter, R::IntoIter> where     L: IntoIterator,     R: IntoIterator<Item = L::Item>,

Convert the inner value to an iterator.

use either::*;

let left: Either<_, Vec<u32>> = Left(vec![1, 2, 3, 4, 5]);
let mut right: Either<Vec<u32>, _> = Right(vec![]);
right.extend(left.into_iter());
assert_eq!(right, Right(vec![1, 2, 3, 4, 5]));

Trait Implementations

impl<L: Copy, R: Copy> Copy for Either<L, R>

impl<L: Clone, R: Clone> Clone for Either<L, R>

Important traits for Either<L, R>

impl<L, R> Iterator for Either<L, R> where
    L: Iterator,
    R: Iterator<Item = L::Item>,  type Item = L::Item;impl<L, R> Read for Either<L, R> where
    L: Read,
    R: Read, impl<L, R> Write for Either<L, R> where
    L: Write,
    R: Write, 

fn clone(&self) -> Either<L, R>

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<L: PartialEq, R: PartialEq> PartialEq for Either<L, R>

fn eq(&self, other: &Either<L, R>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Either<L, R>) -> bool

This method tests for !=.

impl<L: Eq, R: Eq> Eq for Either<L, R>

impl<L: PartialOrd, R: PartialOrd> PartialOrd for Either<L, R>

fn partial_cmp(&self, other: &Either<L, R>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Either<L, R>) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Either<L, R>) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Either<L, R>) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Either<L, R>) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<L: Ord, R: Ord> Ord for Either<L, R>

fn cmp(&self, other: &Either<L, R>) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

impl<L: Hash, R: Hash> Hash for Either<L, R>

fn hash<__HLR: Hasher>(&self, state: &mut __HLR)

Feeds this value into the given [Hasher].

fn hash_slice<H>(data: &[Self], state: &mut H) where     H: Hasher,

Feeds a slice of this type into the given [Hasher].

impl<L: Debug, R: Debug> Debug for Either<L, R>

fn fmt(&self, f: &mut Formatter) -> Result

Formats the value using the given formatter.

impl<L, R> From<Result<R, L>> for Either<L, R>

Convert from Result to Either with Ok => Right and Err => Left.

fn from(r: Result<R, L>) -> Self

Performs the conversion.

impl<L, R> Into<Result<R, L>> for Either<L, R>

Convert from Either to Result with Right => Ok and Left => Err.

fn into(self) -> Result<R, L>

Performs the conversion.

impl<L, R, A> Extend<A> for Either<L, R> where     L: Extend<A>,     R: Extend<A>,

fn extend<T>(&mut self, iter: T) where     T: IntoIterator<Item = A>,

Extends a collection with the contents of an iterator.

impl<L, R> Iterator for Either<L, R> where     L: Iterator,     R: Iterator<Item = L::Item>,

Either<L, R> is an iterator if both L and R are iterators.

type Item = L::Item

The type of the elements being iterated over.

fn next(&mut self) -> Option<Self::Item>

Advances the iterator and returns the next value.

fn size_hint(&self) -> (usize, Option<usize>)

Returns the bounds on the remaining length of the iterator.

fn fold<Acc, G>(self, init: Acc, f: G) -> Acc where     G: FnMut(Acc, Self::Item) -> Acc,

An iterator method that applies a function, producing a single, final value.

fn count(self) -> usize

Consumes the iterator, counting the number of iterations and returning it.

fn last(self) -> Option<Self::Item>

Consumes the iterator, returning the last element.

fn nth(&mut self, n: usize) -> Option<Self::Item>

Returns the nth element of the iterator.

fn collect<B>(self) -> B where     B: FromIterator<Self::Item>,

Transforms an iterator into a collection.

fn all<F>(&mut self, f: F) -> bool where     F: FnMut(Self::Item) -> bool,

Tests if every element of the iterator matches a predicate.

fn step_by(self, step: usize) -> StepBy<Self>

Creates an iterator starting at the same point, but stepping by the given amount at each iteration.

fn chain<U>(self, other: U) -> Chain<Self, <U as IntoIterator>::IntoIter> where     U: IntoIterator<Item = Self::Item>,

Takes two iterators and creates a new iterator over both in sequence.

fn zip<U>(self, other: U) -> Zip<Self, <U as IntoIterator>::IntoIter> where     U: IntoIterator,

'Zips up' two iterators into a single iterator of pairs.

fn map<B, F>(self, f: F) -> Map<Self, F> where     F: FnMut(Self::Item) -> B,

Takes a closure and creates an iterator which calls that closure on each element.

fn for_each<F>(self, f: F) where     F: FnMut(Self::Item),

Calls a closure on each element of an iterator.

fn filter<P>(self, predicate: P) -> Filter<Self, P> where     P: FnMut(&Self::Item) -> bool,

Creates an iterator which uses a closure to determine if an element should be yielded.

fn filter_map<B, F>(self, f: F) -> FilterMap<Self, F> where     F: FnMut(Self::Item) -> Option<B>,

Creates an iterator that both filters and maps.

fn enumerate(self) -> Enumerate<Self>

Creates an iterator which gives the current iteration count as well as the next value.

fn peekable(self) -> Peekable<Self>

Creates an iterator which can use peek to look at the next element of the iterator without consuming it.

fn skip_while<P>(self, predicate: P) -> SkipWhile<Self, P> where     P: FnMut(&Self::Item) -> bool,

Creates an iterator that [skip]s elements based on a predicate.

fn take_while<P>(self, predicate: P) -> TakeWhile<Self, P> where     P: FnMut(&Self::Item) -> bool,

Creates an iterator that yields elements based on a predicate.

fn skip(self, n: usize) -> Skip<Self>

Creates an iterator that skips the first n elements.

fn take(self, n: usize) -> Take<Self>

Creates an iterator that yields its first n elements.

fn scan<St, B, F>(self, initial_state: St, f: F) -> Scan<Self, St, F> where     F: FnMut(&mut St, Self::Item) -> Option<B>,

An iterator adaptor similar to [fold] that holds internal state and produces a new iterator.

fn flat_map<U, F>(self, f: F) -> FlatMap<Self, U, F> where     F: FnMut(Self::Item) -> U,     U: IntoIterator,

Creates an iterator that works like map, but flattens nested structure.

fn flatten(self) -> Flatten<Self> where     Self::Item: IntoIterator,

Creates an iterator that flattens nested structure.

fn fuse(self) -> Fuse<Self>

Creates an iterator which ends after the first [None].

fn inspect<F>(self, f: F) -> Inspect<Self, F> where     F: FnMut(&Self::Item),

Do something with each element of an iterator, passing the value on.

fn by_ref(&mut self) -> &mut Self

Borrows an iterator, rather than consuming it.

fn partition<B, F>(self, f: F) -> (B, B) where     B: Default + Extend<Self::Item>,     F: FnMut(&Self::Item) -> bool,

Consumes an iterator, creating two collections from it.

fn try_fold<B, F, R>(&mut self, init: B, f: F) -> R where     F: FnMut(B, Self::Item) -> R,     R: Try<Ok = B>,

An iterator method that applies a function as long as it returns successfully, producing a single, final value.

fn try_for_each<F, R>(&mut self, f: F) -> R where     F: FnMut(Self::Item) -> R,     R: Try<Ok = ()>,

An iterator method that applies a fallible function to each item in the iterator, stopping at the first error and returning that error.

fn any<F>(&mut self, f: F) -> bool where     F: FnMut(Self::Item) -> bool,

Tests if any element of the iterator matches a predicate.

fn find<P>(&mut self, predicate: P) -> Option<Self::Item> where     P: FnMut(&Self::Item) -> bool,

Searches for an element of an iterator that satisfies a predicate.

fn find_map<B, F>(&mut self, f: F) -> Option<B> where     F: FnMut(Self::Item) -> Option<B>,

🔬 This is a nightly-only experimental API. (iterator_find_map)

unstable new API

Applies function to the elements of iterator and returns the first non-none result.

fn position<P>(&mut self, predicate: P) -> Option<usize> where     P: FnMut(Self::Item) -> bool,

Searches for an element in an iterator, returning its index.

fn rposition<P>(&mut self, predicate: P) -> Option<usize> where     P: FnMut(Self::Item) -> bool,     Self: ExactSizeIterator + DoubleEndedIterator,

Searches for an element in an iterator from the right, returning its index.

fn max(self) -> Option<Self::Item> where     Self::Item: Ord,

Returns the maximum element of an iterator.

fn min(self) -> Option<Self::Item> where     Self::Item: Ord,

Returns the minimum element of an iterator.

fn max_by_key<B, F>(self, f: F) -> Option<Self::Item> where     B: Ord,     F: FnMut(&Self::Item) -> B,

Returns the element that gives the maximum value from the specified function.

fn max_by<F>(self, compare: F) -> Option<Self::Item> where     F: FnMut(&Self::Item, &Self::Item) -> Ordering,

Returns the element that gives the maximum value with respect to the specified comparison function.

fn min_by_key<B, F>(self, f: F) -> Option<Self::Item> where     B: Ord,     F: FnMut(&Self::Item) -> B,

Returns the element that gives the minimum value from the specified function.

fn min_by<F>(self, compare: F) -> Option<Self::Item> where     F: FnMut(&Self::Item, &Self::Item) -> Ordering,

Returns the element that gives the minimum value with respect to the specified comparison function.

fn rev(self) -> Rev<Self> where     Self: DoubleEndedIterator,

Reverses an iterator's direction.

fn unzip<A, B, FromA, FromB>(self) -> (FromA, FromB) where     FromA: Default + Extend<A>,     FromB: Default + Extend<B>,     Self: Iterator<Item = (A, B)>,

Converts an iterator of pairs into a pair of containers.

fn cloned<'a, T>(self) -> Cloned<Self> where     Self: Iterator<Item = &'a T>,     T: 'a + Clone,

Creates an iterator which [clone]s all of its elements.

fn cycle(self) -> Cycle<Self> where     Self: Clone,

Repeats an iterator endlessly.

fn sum<S>(self) -> S where     S: Sum<Self::Item>,

Sums the elements of an iterator.

fn product<P>(self) -> P where     P: Product<Self::Item>,

Iterates over the entire iterator, multiplying all the elements

fn cmp<I>(self, other: I) -> Ordering where     I: IntoIterator<Item = Self::Item>,     Self::Item: Ord,

Lexicographically compares the elements of this Iterator with those of another.

fn partial_cmp<I>(self, other: I) -> Option<Ordering> where     I: IntoIterator,     Self::Item: PartialOrd<<I as IntoIterator>::Item>,

Lexicographically compares the elements of this Iterator with those of another.

fn eq<I>(self, other: I) -> bool where     I: IntoIterator,     Self::Item: PartialEq<<I as IntoIterator>::Item>,

Determines if the elements of this Iterator are equal to those of another.

fn ne<I>(self, other: I) -> bool where     I: IntoIterator,     Self::Item: PartialEq<<I as IntoIterator>::Item>,

Determines if the elements of this Iterator are unequal to those of another.

fn lt<I>(self, other: I) -> bool where     I: IntoIterator,     Self::Item: PartialOrd<<I as IntoIterator>::Item>,

Determines if the elements of this Iterator are lexicographically less than those of another.

fn le<I>(self, other: I) -> bool where     I: IntoIterator,     Self::Item: PartialOrd<<I as IntoIterator>::Item>,

Determines if the elements of this Iterator are lexicographically less or equal to those of another.

fn gt<I>(self, other: I) -> bool where     I: IntoIterator,     Self::Item: PartialOrd<<I as IntoIterator>::Item>,

Determines if the elements of this Iterator are lexicographically greater than those of another.

fn ge<I>(self, other: I) -> bool where     I: IntoIterator,     Self::Item: PartialOrd<<I as IntoIterator>::Item>,

Determines if the elements of this Iterator are lexicographically greater than or equal to those of another.

impl<L, R> DoubleEndedIterator for Either<L, R> where     L: DoubleEndedIterator,     R: DoubleEndedIterator<Item = L::Item>,

fn next_back(&mut self) -> Option<Self::Item>

Removes and returns an element from the end of the iterator.

fn try_rfold<B, F, R>(&mut self, init: B, f: F) -> R where     F: FnMut(B, Self::Item) -> R,     R: Try<Ok = B>,

This is the reverse version of [try_fold()]: it takes elements starting from the back of the iterator.

fn rfold<B, F>(self, accum: B, f: F) -> B where     F: FnMut(B, Self::Item) -> B,

An iterator method that reduces the iterator's elements to a single, final value, starting from the back.

fn rfind<P>(&mut self, predicate: P) -> Option<Self::Item> where     P: FnMut(&Self::Item) -> bool,

Searches for an element of an iterator from the back that satisfies a predicate.

impl<L, R> ExactSizeIterator for Either<L, R> where     L: ExactSizeIterator,     R: ExactSizeIterator<Item = L::Item>,

fn len(&self) -> usize

Returns the exact number of times the iterator will iterate.

fn is_empty(&self) -> bool

🔬 This is a nightly-only experimental API. (exact_size_is_empty)

Returns whether the iterator is empty.

impl<L, R> Read for Either<L, R> where     L: Read,     R: Read,

Either<L, R> implements Read if both L and R do.

Requires crate feature "use_std"

fn read(&mut self, buf: &mut [u8]) -> Result<usize>

Pull some bytes from this source into the specified buffer, returning how many bytes were read.

fn read_to_end(&mut self, buf: &mut Vec<u8>) -> Result<usize>

Read all bytes until EOF in this source, placing them into buf.

unsafe fn initializer(&self) -> Initializer

🔬 This is a nightly-only experimental API. (read_initializer)

Determines if this Reader can work with buffers of uninitialized memory.

fn read_to_string(&mut self, buf: &mut String) -> Result<usize, Error>

Read all bytes until EOF in this source, appending them to buf.

fn read_exact(&mut self, buf: &mut [u8]) -> Result<(), Error>

Read the exact number of bytes required to fill buf.

fn by_ref(&mut self) -> &mut Self

Creates a "by reference" adaptor for this instance of Read.

fn bytes(self) -> Bytes<Self>

Transforms this Read instance to an [Iterator] over its bytes.

fn chain<R>(self, next: R) -> Chain<Self, R> where     R: Read,

Creates an adaptor which will chain this stream with another.

fn take(self, limit: u64) -> Take<Self>

Creates an adaptor which will read at most limit bytes from it.

impl<L, R> BufRead for Either<L, R> where     L: BufRead,     R: BufRead,

Requires crate feature "use_std"

fn fill_buf(&mut self) -> Result<&[u8]>

Fills the internal buffer of this object, returning the buffer contents.

fn consume(&mut self, amt: usize)

Tells this buffer that amt bytes have been consumed from the buffer, so they should no longer be returned in calls to read.

fn read_until(&mut self, byte: u8, buf: &mut Vec<u8>) -> Result<usize, Error>

Read all bytes into buf until the delimiter byte or EOF is reached.

fn read_line(&mut self, buf: &mut String) -> Result<usize, Error>

Read all bytes until a newline (the 0xA byte) is reached, and append them to the provided buffer.

fn split(self, byte: u8) -> Split<Self>

Returns an iterator over the contents of this reader split on the byte byte.

fn lines(self) -> Lines<Self>

Returns an iterator over the lines of this reader.

impl<L, R> Write for Either<L, R> where     L: Write,     R: Write,

Either<L, R> implements Write if both L and R do.

Requires crate feature "use_std"

fn write(&mut self, buf: &[u8]) -> Result<usize>

Write a buffer into this object, returning how many bytes were written.

fn flush(&mut self) -> Result<()>

Flush this output stream, ensuring that all intermediately buffered contents reach their destination.

fn write_all(&mut self, buf: &[u8]) -> Result<(), Error>

Attempts to write an entire buffer into this write.

fn write_fmt(&mut self, fmt: Arguments) -> Result<(), Error>

Writes a formatted string into this writer, returning any error encountered.

fn by_ref(&mut self) -> &mut Self

Creates a "by reference" adaptor for this instance of Write.

impl<L, R, Target> AsRef<Target> for Either<L, R> where     L: AsRef<Target>,     R: AsRef<Target>,

fn as_ref(&self) -> &Target

Performs the conversion.

impl<L, R, Target> AsMut<Target> for Either<L, R> where     L: AsMut<Target>,     R: AsMut<Target>,

fn as_mut(&mut self) -> &mut Target

Performs the conversion.

impl<L, R> Deref for Either<L, R> where     L: Deref,     R: Deref<Target = L::Target>,

type Target = L::Target

The resulting type after dereferencing.

fn deref(&self) -> &Self::Target

Dereferences the value.

impl<L, R> DerefMut for Either<L, R> where     L: DerefMut,     R: DerefMut<Target = L::Target>,

fn deref_mut(&mut self) -> &mut Self::Target

Mutably dereferences the value.

impl<L, R> Error for Either<L, R> where     L: Error,     R: Error,

Either implements Error if both L and R implement it.

fn description(&self) -> &str

This method is soft-deprecated.

fn cause(&self) -> Option<&Error>

The lower-level cause of this error, if any.

impl<L, R> Display for Either<L, R> where     L: Display,     R: Display,

fn fmt(&self, f: &mut Formatter) -> Result

Formats the value using the given formatter.