1.0.0[−][src]Enum futures_io::ErrorKind
pub enum ErrorKind { NotFound, PermissionDenied, ConnectionRefused, ConnectionReset, ConnectionAborted, NotConnected, AddrInUse, AddrNotAvailable, BrokenPipe, AlreadyExists, WouldBlock, InvalidInput, InvalidData, TimedOut, WriteZero, Interrupted, Other, UnexpectedEof, // some variants omitted }
A list specifying general categories of I/O error.
This list is intended to grow over time and it is not recommended to exhaustively match against it.
It is used with the io::Error
type.
Variants
NotFound
An entity was not found, often a file.
PermissionDenied
The operation lacked the necessary privileges to complete.
ConnectionRefused
The connection was refused by the remote server.
ConnectionReset
The connection was reset by the remote server.
ConnectionAborted
The connection was aborted (terminated) by the remote server.
NotConnected
The network operation failed because it was not connected yet.
AddrInUse
A socket address could not be bound because the address is already in use elsewhere.
AddrNotAvailable
A nonexistent interface was requested or the requested address was not local.
BrokenPipe
The operation failed because a pipe was closed.
AlreadyExists
An entity already exists, often a file.
WouldBlock
The operation needs to block to complete, but the blocking operation was requested to not occur.
InvalidInput
A parameter was incorrect.
InvalidData
Data not valid for the operation were encountered.
Unlike InvalidInput
, this typically means that the operation
parameters were valid, however the error was caused by malformed
input data.
For example, a function that reads a file into a string will error with
InvalidData
if the file's contents are not valid UTF-8.
TimedOut
The I/O operation's timeout expired, causing it to be canceled.
WriteZero
An error returned when an operation could not be completed because a
call to write
returned Ok(0)
.
This typically means that an operation could only succeed if it wrote a particular number of bytes but only a smaller number of bytes could be written.
Interrupted
This operation was interrupted.
Interrupted operations can typically be retried.
Other
Any I/O error not part of this list.
UnexpectedEof
An error returned when an operation could not be completed because an "end of file" was reached prematurely.
This typically means that an operation could only succeed if it read a particular number of bytes but only a smaller number of bytes could be read.
Trait Implementations
impl PartialOrd<ErrorKind> for ErrorKind
[src]
impl PartialOrd<ErrorKind> for ErrorKind
fn partial_cmp(&self, other: &ErrorKind) -> Option<Ordering>
[src]
fn partial_cmp(&self, other: &ErrorKind) -> Option<Ordering>
This method returns an ordering between self
and other
values if one exists. Read more
#[must_use]
fn lt(&self, other: &Rhs) -> bool
[src]
#[must_use]
fn lt(&self, other: &Rhs) -> bool
This method tests less than (for self
and other
) and is used by the <
operator. Read more
#[must_use]
fn le(&self, other: &Rhs) -> bool
[src]
#[must_use]
fn le(&self, other: &Rhs) -> bool
This method tests less than or equal to (for self
and other
) and is used by the <=
operator. Read more
#[must_use]
fn gt(&self, other: &Rhs) -> bool
[src]
#[must_use]
fn gt(&self, other: &Rhs) -> bool
This method tests greater than (for self
and other
) and is used by the >
operator. Read more
#[must_use]
fn ge(&self, other: &Rhs) -> bool
[src]
#[must_use]
fn ge(&self, other: &Rhs) -> bool
This method tests greater than or equal to (for self
and other
) and is used by the >=
operator. Read more
impl Eq for ErrorKind
[src]
impl Eq for ErrorKind
impl Ord for ErrorKind
[src]
impl Ord for ErrorKind
fn cmp(&self, other: &ErrorKind) -> Ordering
[src]
fn cmp(&self, other: &ErrorKind) -> Ordering
This method returns an Ordering
between self
and other
. Read more
fn max(self, other: Self) -> Self
1.21.0[src]
fn max(self, other: Self) -> Self
Compares and returns the maximum of two values. Read more
fn min(self, other: Self) -> Self
1.21.0[src]
fn min(self, other: Self) -> Self
Compares and returns the minimum of two values. Read more
impl Debug for ErrorKind
[src]
impl Debug for ErrorKind
fn fmt(&self, f: &mut Formatter) -> Result<(), Error>
[src]
fn fmt(&self, f: &mut Formatter) -> Result<(), Error>
Formats the value using the given formatter. Read more
impl Clone for ErrorKind
[src]
impl Clone for ErrorKind
fn clone(&self) -> ErrorKind
[src]
fn clone(&self) -> ErrorKind
Returns a copy of the value. Read more
fn clone_from(&mut self, source: &Self)
[src]
fn clone_from(&mut self, source: &Self)
Performs copy-assignment from source
. Read more
impl Copy for ErrorKind
[src]
impl Copy for ErrorKind
impl Hash for ErrorKind
[src]
impl Hash for ErrorKind
fn hash<__H>(&self, state: &mut __H) where
__H: Hasher,
[src]
fn hash<__H>(&self, state: &mut __H) where
__H: Hasher,
Feeds this value into the given [Hasher
]. Read more
fn hash_slice<H>(data: &[Self], state: &mut H) where
H: Hasher,
1.3.0[src]
fn hash_slice<H>(data: &[Self], state: &mut H) where
H: Hasher,
Feeds a slice of this type into the given [Hasher
]. Read more
impl PartialEq<ErrorKind> for ErrorKind
[src]
impl PartialEq<ErrorKind> for ErrorKind
fn eq(&self, other: &ErrorKind) -> bool
[src]
fn eq(&self, other: &ErrorKind) -> bool
This method tests for self
and other
values to be equal, and is used by ==
. Read more
#[must_use]
fn ne(&self, other: &Rhs) -> bool
[src]
#[must_use]
fn ne(&self, other: &Rhs) -> bool
This method tests for !=
.
impl From<ErrorKind> for Error
1.14.0[src]
impl From<ErrorKind> for Error
Intended for use for errors not exposed to the user, where allocating onto the heap (for normal construction via Error::new) is too costly.
Auto Trait Implementations
Blanket Implementations
impl<T> From for T
[src]
impl<T> From for T
impl<T, U> TryFrom for T where
T: From<U>,
[src]
impl<T, U> TryFrom for T where
T: From<U>,
type Error = !
try_from
)The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
try_from
)Performs the conversion.
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
try_from
)The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
try_from
)Performs the conversion.
impl<T, U> Into for T where
U: From<T>,
[src]
impl<T, U> Into for T where
U: From<T>,
impl<T> Borrow for T where
T: ?Sized,
[src]
impl<T> Borrow for T where
T: ?Sized,
ⓘImportant traits for &'a mut Ifn borrow(&self) -> &T
[src]
fn borrow(&self) -> &T
Immutably borrows from an owned value. Read more
impl<T> BorrowMut for T where
T: ?Sized,
[src]
impl<T> BorrowMut for T where
T: ?Sized,
ⓘImportant traits for &'a mut Ifn borrow_mut(&mut self) -> &mut T
[src]
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
impl<T> Any for T where
T: 'static + ?Sized,
[src]
impl<T> Any for T where
T: 'static + ?Sized,
fn get_type_id(&self) -> TypeId
[src]
fn get_type_id(&self) -> TypeId
🔬 This is a nightly-only experimental API. (get_type_id
)
this method will likely be replaced by an associated static
Gets the TypeId
of self
. Read more
impl<T> ToOwned for T where
T: Clone,
[src]
impl<T> ToOwned for T where
T: Clone,
type Owned = T
fn to_owned(&self) -> T
[src]
fn to_owned(&self) -> T
Creates owned data from borrowed data, usually by cloning. Read more
fn clone_into(&self, target: &mut T)
[src]
fn clone_into(&self, target: &mut T)
🔬 This is a nightly-only experimental API. (toowned_clone_into
)
recently added
Uses borrowed data to replace owned data, usually by cloning. Read more