[−][src]Struct futures::sink::SinkFromErr
#[must_use = "futures do nothing unless polled"]pub struct SinkFromErr<S, E> { /* fields omitted */ }
A sink combinator to change the error type of a sink.
This is created by the Sink::from_err
method.
Methods
impl<S, E> SinkFromErr<S, E>
[src]
impl<S, E> SinkFromErr<S, E>
pub fn get_ref(&self) -> &S
[src]
pub fn get_ref(&self) -> &S
Get a shared reference to the inner sink.
pub fn get_mut(&mut self) -> &mut S
[src]
pub fn get_mut(&mut self) -> &mut S
Get a mutable reference to the inner sink.
pub fn into_inner(self) -> S
[src]
pub fn into_inner(self) -> S
Consumes this combinator, returning the underlying sink.
Note that this may discard intermediate state of this combinator, so care should be taken to avoid losing resources when this is called.
Trait Implementations
impl<S: Debug, E: Debug> Debug for SinkFromErr<S, E>
[src]
impl<S: Debug, E: Debug> Debug for SinkFromErr<S, E>
fn fmt(&self, f: &mut Formatter) -> Result
[src]
fn fmt(&self, f: &mut Formatter) -> Result
Formats the value using the given formatter. Read more
impl<S, E> Sink for SinkFromErr<S, E> where
S: Sink,
E: From<S::SinkError>,
[src]
impl<S, E> Sink for SinkFromErr<S, E> where
S: Sink,
E: From<S::SinkError>,
type SinkItem = S::SinkItem
The type of value that the sink accepts.
type SinkError = E
The type of value produced by the sink when an error occurs.
fn start_send(
&mut self,
item: Self::SinkItem
) -> StartSend<Self::SinkItem, Self::SinkError>
[src]
fn start_send(
&mut self,
item: Self::SinkItem
) -> StartSend<Self::SinkItem, Self::SinkError>
Begin the process of sending a value to the sink. Read more
fn poll_complete(&mut self) -> Poll<(), Self::SinkError>
[src]
fn poll_complete(&mut self) -> Poll<(), Self::SinkError>
Flush all output from this sink, if necessary. Read more
fn close(&mut self) -> Poll<(), Self::SinkError>
[src]
fn close(&mut self) -> Poll<(), Self::SinkError>
A method to indicate that no more values will ever be pushed into this sink. Read more
fn wait(self) -> Wait<Self> where
Self: Sized,
[src]
fn wait(self) -> Wait<Self> where
Self: Sized,
Creates a new object which will produce a synchronous sink. Read more
fn with<U, F, Fut>(self, f: F) -> With<Self, U, F, Fut> where
F: FnMut(U) -> Fut,
Fut: IntoFuture<Item = Self::SinkItem>,
Fut::Error: From<Self::SinkError>,
Self: Sized,
[src]
fn with<U, F, Fut>(self, f: F) -> With<Self, U, F, Fut> where
F: FnMut(U) -> Fut,
Fut: IntoFuture<Item = Self::SinkItem>,
Fut::Error: From<Self::SinkError>,
Self: Sized,
Composes a function in front of the sink. Read more
fn with_flat_map<U, F, St>(self, f: F) -> WithFlatMap<Self, U, F, St> where
F: FnMut(U) -> St,
St: Stream<Item = Self::SinkItem, Error = Self::SinkError>,
Self: Sized,
[src]
fn with_flat_map<U, F, St>(self, f: F) -> WithFlatMap<Self, U, F, St> where
F: FnMut(U) -> St,
St: Stream<Item = Self::SinkItem, Error = Self::SinkError>,
Self: Sized,
Composes a function in front of the sink. Read more
fn sink_map_err<F, E>(self, f: F) -> SinkMapErr<Self, F> where
F: FnOnce(Self::SinkError) -> E,
Self: Sized,
[src]
fn sink_map_err<F, E>(self, f: F) -> SinkMapErr<Self, F> where
F: FnOnce(Self::SinkError) -> E,
Self: Sized,
Transforms the error returned by the sink.
fn sink_from_err<E: From<Self::SinkError>>(self) -> SinkFromErr<Self, E> where
Self: Sized,
[src]
fn sink_from_err<E: From<Self::SinkError>>(self) -> SinkFromErr<Self, E> where
Self: Sized,
Map this sink's error to any error implementing From
for this sink's Error
, returning a new sink. Read more
fn buffer(self, amt: usize) -> Buffer<Self> where
Self: Sized,
[src]
fn buffer(self, amt: usize) -> Buffer<Self> where
Self: Sized,
Adds a fixed-size buffer to the current sink. Read more
fn fanout<S>(self, other: S) -> Fanout<Self, S> where
Self: Sized,
Self::SinkItem: Clone,
S: Sink<SinkItem = Self::SinkItem, SinkError = Self::SinkError>,
[src]
fn fanout<S>(self, other: S) -> Fanout<Self, S> where
Self: Sized,
Self::SinkItem: Clone,
S: Sink<SinkItem = Self::SinkItem, SinkError = Self::SinkError>,
Fanout items to multiple sinks. Read more
fn flush(self) -> Flush<Self> where
Self: Sized,
[src]
fn flush(self) -> Flush<Self> where
Self: Sized,
A future that completes when the sink has finished processing all pending requests. Read more
fn send(self, item: Self::SinkItem) -> Send<Self> where
Self: Sized,
[src]
fn send(self, item: Self::SinkItem) -> Send<Self> where
Self: Sized,
A future that completes after the given item has been fully processed into the sink, including flushing. Read more
fn send_all<S>(self, stream: S) -> SendAll<Self, S> where
S: Stream<Item = Self::SinkItem>,
Self::SinkError: From<S::Error>,
Self: Sized,
[src]
fn send_all<S>(self, stream: S) -> SendAll<Self, S> where
S: Stream<Item = Self::SinkItem>,
Self::SinkError: From<S::Error>,
Self: Sized,
A future that completes after the given stream has been fully processed into the sink, including flushing. Read more
impl<S: Stream, E> Stream for SinkFromErr<S, E>
[src]
impl<S: Stream, E> Stream for SinkFromErr<S, E>
type Item = S::Item
The type of item this stream will yield on success.
type Error = S::Error
The type of error this stream may generate.
fn poll(&mut self) -> Poll<Option<S::Item>, S::Error>
[src]
fn poll(&mut self) -> Poll<Option<S::Item>, S::Error>
Attempt to pull out the next value of this stream, returning None
if the stream is finished. Read more
ⓘImportant traits for Wait<S>fn wait(self) -> Wait<Self> where
Self: Sized,
[src]
fn wait(self) -> Wait<Self> where
Self: Sized,
Creates an iterator which blocks the current thread until each item of this stream is resolved. Read more
fn into_future(self) -> StreamFuture<Self> where
Self: Sized,
[src]
fn into_future(self) -> StreamFuture<Self> where
Self: Sized,
Converts this stream into a Future
. Read more
fn map<U, F>(self, f: F) -> Map<Self, F> where
F: FnMut(Self::Item) -> U,
Self: Sized,
[src]
fn map<U, F>(self, f: F) -> Map<Self, F> where
F: FnMut(Self::Item) -> U,
Self: Sized,
Converts a stream of type T
to a stream of type U
. Read more
fn map_err<U, F>(self, f: F) -> MapErr<Self, F> where
F: FnMut(Self::Error) -> U,
Self: Sized,
[src]
fn map_err<U, F>(self, f: F) -> MapErr<Self, F> where
F: FnMut(Self::Error) -> U,
Self: Sized,
Converts a stream of error type T
to a stream of error type U
. Read more
fn filter<F>(self, f: F) -> Filter<Self, F> where
F: FnMut(&Self::Item) -> bool,
Self: Sized,
[src]
fn filter<F>(self, f: F) -> Filter<Self, F> where
F: FnMut(&Self::Item) -> bool,
Self: Sized,
Filters the values produced by this stream according to the provided predicate. Read more
fn filter_map<F, B>(self, f: F) -> FilterMap<Self, F> where
F: FnMut(Self::Item) -> Option<B>,
Self: Sized,
[src]
fn filter_map<F, B>(self, f: F) -> FilterMap<Self, F> where
F: FnMut(Self::Item) -> Option<B>,
Self: Sized,
Filters the values produced by this stream while simultaneously mapping them to a different type. Read more
fn then<F, U>(self, f: F) -> Then<Self, F, U> where
F: FnMut(Result<Self::Item, Self::Error>) -> U,
U: IntoFuture,
Self: Sized,
[src]
fn then<F, U>(self, f: F) -> Then<Self, F, U> where
F: FnMut(Result<Self::Item, Self::Error>) -> U,
U: IntoFuture,
Self: Sized,
Chain on a computation for when a value is ready, passing the resulting item to the provided closure f
. Read more
fn and_then<F, U>(self, f: F) -> AndThen<Self, F, U> where
F: FnMut(Self::Item) -> U,
U: IntoFuture<Error = Self::Error>,
Self: Sized,
[src]
fn and_then<F, U>(self, f: F) -> AndThen<Self, F, U> where
F: FnMut(Self::Item) -> U,
U: IntoFuture<Error = Self::Error>,
Self: Sized,
Chain on a computation for when a value is ready, passing the successful results to the provided closure f
. Read more
fn or_else<F, U>(self, f: F) -> OrElse<Self, F, U> where
F: FnMut(Self::Error) -> U,
U: IntoFuture<Item = Self::Item>,
Self: Sized,
[src]
fn or_else<F, U>(self, f: F) -> OrElse<Self, F, U> where
F: FnMut(Self::Error) -> U,
U: IntoFuture<Item = Self::Item>,
Self: Sized,
Chain on a computation for when an error happens, passing the erroneous result to the provided closure f
. Read more
fn collect(self) -> Collect<Self> where
Self: Sized,
[src]
fn collect(self) -> Collect<Self> where
Self: Sized,
Collect all of the values of this stream into a vector, returning a future representing the result of that computation. Read more
fn concat2(self) -> Concat2<Self> where
Self: Sized,
Self::Item: Extend<<Self::Item as IntoIterator>::Item> + IntoIterator + Default,
[src]
fn concat2(self) -> Concat2<Self> where
Self: Sized,
Self::Item: Extend<<Self::Item as IntoIterator>::Item> + IntoIterator + Default,
Concatenate all results of a stream into a single extendable destination, returning a future representing the end result. Read more
fn concat(self) -> Concat<Self> where
Self: Sized,
Self::Item: Extend<<Self::Item as IntoIterator>::Item> + IntoIterator,
[src]
fn concat(self) -> Concat<Self> where
Self: Sized,
Self::Item: Extend<<Self::Item as IntoIterator>::Item> + IntoIterator,
: please use Stream::concat2
instead
Concatenate all results of a stream into a single extendable destination, returning a future representing the end result. Read more
fn fold<F, T, Fut>(self, init: T, f: F) -> Fold<Self, F, Fut, T> where
F: FnMut(T, Self::Item) -> Fut,
Fut: IntoFuture<Item = T>,
Self::Error: From<Fut::Error>,
Self: Sized,
[src]
fn fold<F, T, Fut>(self, init: T, f: F) -> Fold<Self, F, Fut, T> where
F: FnMut(T, Self::Item) -> Fut,
Fut: IntoFuture<Item = T>,
Self::Error: From<Fut::Error>,
Self: Sized,
Execute an accumulating computation over a stream, collecting all the values into one final result. Read more
fn flatten(self) -> Flatten<Self> where
Self::Item: Stream,
<Self::Item as Stream>::Error: From<Self::Error>,
Self: Sized,
[src]
fn flatten(self) -> Flatten<Self> where
Self::Item: Stream,
<Self::Item as Stream>::Error: From<Self::Error>,
Self: Sized,
Flattens a stream of streams into just one continuous stream. Read more
fn skip_while<P, R>(self, pred: P) -> SkipWhile<Self, P, R> where
P: FnMut(&Self::Item) -> R,
R: IntoFuture<Item = bool, Error = Self::Error>,
Self: Sized,
[src]
fn skip_while<P, R>(self, pred: P) -> SkipWhile<Self, P, R> where
P: FnMut(&Self::Item) -> R,
R: IntoFuture<Item = bool, Error = Self::Error>,
Self: Sized,
Skip elements on this stream while the predicate provided resolves to true
. Read more
fn take_while<P, R>(self, pred: P) -> TakeWhile<Self, P, R> where
P: FnMut(&Self::Item) -> R,
R: IntoFuture<Item = bool, Error = Self::Error>,
Self: Sized,
[src]
fn take_while<P, R>(self, pred: P) -> TakeWhile<Self, P, R> where
P: FnMut(&Self::Item) -> R,
R: IntoFuture<Item = bool, Error = Self::Error>,
Self: Sized,
Take elements from this stream while the predicate provided resolves to true
. Read more
fn for_each<F, U>(self, f: F) -> ForEach<Self, F, U> where
F: FnMut(Self::Item) -> U,
U: IntoFuture<Item = (), Error = Self::Error>,
Self: Sized,
[src]
fn for_each<F, U>(self, f: F) -> ForEach<Self, F, U> where
F: FnMut(Self::Item) -> U,
U: IntoFuture<Item = (), Error = Self::Error>,
Self: Sized,
Runs this stream to completion, executing the provided closure for each element on the stream. Read more
fn from_err<E: From<Self::Error>>(self) -> FromErr<Self, E> where
Self: Sized,
[src]
fn from_err<E: From<Self::Error>>(self) -> FromErr<Self, E> where
Self: Sized,
Map this stream's error to any error implementing From
for this stream's Error
, returning a new stream. Read more
fn take(self, amt: u64) -> Take<Self> where
Self: Sized,
[src]
fn take(self, amt: u64) -> Take<Self> where
Self: Sized,
Creates a new stream of at most amt
items of the underlying stream. Read more
fn skip(self, amt: u64) -> Skip<Self> where
Self: Sized,
[src]
fn skip(self, amt: u64) -> Skip<Self> where
Self: Sized,
Creates a new stream which skips amt
items of the underlying stream. Read more
fn fuse(self) -> Fuse<Self> where
Self: Sized,
[src]
fn fuse(self) -> Fuse<Self> where
Self: Sized,
Fuse a stream such that poll
will never again be called once it has finished. Read more
fn by_ref(&mut self) -> &mut Self where
Self: Sized,
[src]
fn by_ref(&mut self) -> &mut Self where
Self: Sized,
Borrows a stream, rather than consuming it. Read more
fn catch_unwind(self) -> CatchUnwind<Self> where
Self: Sized + UnwindSafe,
[src]
fn catch_unwind(self) -> CatchUnwind<Self> where
Self: Sized + UnwindSafe,
Catches unwinding panics while polling the stream. Read more
fn buffered(self, amt: usize) -> Buffered<Self> where
Self::Item: IntoFuture<Error = Self::Error>,
Self: Sized,
[src]
fn buffered(self, amt: usize) -> Buffered<Self> where
Self::Item: IntoFuture<Error = Self::Error>,
Self: Sized,
An adaptor for creating a buffered list of pending futures. Read more
fn buffer_unordered(self, amt: usize) -> BufferUnordered<Self> where
Self::Item: IntoFuture<Error = Self::Error>,
Self: Sized,
[src]
fn buffer_unordered(self, amt: usize) -> BufferUnordered<Self> where
Self::Item: IntoFuture<Error = Self::Error>,
Self: Sized,
An adaptor for creating a buffered list of pending futures (unordered). Read more
fn merge<S>(self, other: S) -> Merge<Self, S> where
S: Stream<Error = Self::Error>,
Self: Sized,
[src]
fn merge<S>(self, other: S) -> Merge<Self, S> where
S: Stream<Error = Self::Error>,
Self: Sized,
: functionality provided by select
now
An adapter for merging the output of two streams. Read more
fn zip<S>(self, other: S) -> Zip<Self, S> where
S: Stream<Error = Self::Error>,
Self: Sized,
[src]
fn zip<S>(self, other: S) -> Zip<Self, S> where
S: Stream<Error = Self::Error>,
Self: Sized,
An adapter for zipping two streams together. Read more
fn chain<S>(self, other: S) -> Chain<Self, S> where
S: Stream<Item = Self::Item, Error = Self::Error>,
Self: Sized,
[src]
fn chain<S>(self, other: S) -> Chain<Self, S> where
S: Stream<Item = Self::Item, Error = Self::Error>,
Self: Sized,
Adapter for chaining two stream. Read more
fn peekable(self) -> Peekable<Self> where
Self: Sized,
[src]
fn peekable(self) -> Peekable<Self> where
Self: Sized,
Creates a new stream which exposes a peek
method. Read more
fn chunks(self, capacity: usize) -> Chunks<Self> where
Self: Sized,
[src]
fn chunks(self, capacity: usize) -> Chunks<Self> where
Self: Sized,
An adaptor for chunking up items of the stream inside a vector. Read more
fn select<S>(self, other: S) -> Select<Self, S> where
S: Stream<Item = Self::Item, Error = Self::Error>,
Self: Sized,
[src]
fn select<S>(self, other: S) -> Select<Self, S> where
S: Stream<Item = Self::Item, Error = Self::Error>,
Self: Sized,
Creates a stream that selects the next element from either this stream or the provided one, whichever is ready first. Read more
fn forward<S>(self, sink: S) -> Forward<Self, S> where
S: Sink<SinkItem = Self::Item>,
Self::Error: From<S::SinkError>,
Self: Sized,
[src]
fn forward<S>(self, sink: S) -> Forward<Self, S> where
S: Sink<SinkItem = Self::Item>,
Self::Error: From<S::SinkError>,
Self: Sized,
A future that completes after the given stream has been fully processed into the sink, including flushing. Read more
fn split(self) -> (SplitSink<Self>, SplitStream<Self>) where
Self: Sink + Sized,
[src]
fn split(self) -> (SplitSink<Self>, SplitStream<Self>) where
Self: Sink + Sized,
Splits this Stream + Sink
object into separate Stream
and Sink
objects. Read more
fn inspect<F>(self, f: F) -> Inspect<Self, F> where
F: FnMut(&Self::Item),
Self: Sized,
[src]
fn inspect<F>(self, f: F) -> Inspect<Self, F> where
F: FnMut(&Self::Item),
Self: Sized,
Do something with each item of this stream, afterwards passing it on. Read more
fn inspect_err<F>(self, f: F) -> InspectErr<Self, F> where
F: FnMut(&Self::Error),
Self: Sized,
[src]
fn inspect_err<F>(self, f: F) -> InspectErr<Self, F> where
F: FnMut(&Self::Error),
Self: Sized,
Do something with the error of this stream, afterwards passing it on. Read more
Auto Trait Implementations
impl<S, E> Send for SinkFromErr<S, E> where
E: Send,
S: Send,
impl<S, E> Send for SinkFromErr<S, E> where
E: Send,
S: Send,
impl<S, E> Sync for SinkFromErr<S, E> where
E: Sync,
S: Sync,
impl<S, E> Sync for SinkFromErr<S, E> where
E: Sync,
S: Sync,
Blanket Implementations
impl<T> From for T
[src]
impl<T> From for T
impl<T, U> TryFrom for T where
T: From<U>,
[src]
impl<T, U> TryFrom for T where
T: From<U>,
type Error = !
try_from
)The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
try_from
)Performs the conversion.
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
try_from
)The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
try_from
)Performs the conversion.
impl<T, U> Into for T where
U: From<T>,
[src]
impl<T, U> Into for T where
U: From<T>,
impl<T> Borrow for T where
T: ?Sized,
[src]
impl<T> Borrow for T where
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
impl<T> BorrowMut for T where
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
impl<T> Any for T where
T: 'static + ?Sized,
[src]
impl<T> Any for T where
T: 'static + ?Sized,
fn get_type_id(&self) -> TypeId
[src]
fn get_type_id(&self) -> TypeId
🔬 This is a nightly-only experimental API. (get_type_id
)
this method will likely be replaced by an associated static
Gets the TypeId
of self
. Read more