[−][src]Struct futures_util::stream::Flatten
A combinator used to flatten a stream-of-streams into one long stream of elements.
This combinator is created by the Stream::flatten
method.
Methods
impl<St: Stream> Flatten<St> where
St: Stream,
St::Item: Stream,
[src]
impl<St: Stream> Flatten<St> where
St: Stream,
St::Item: Stream,
ⓘImportant traits for &'_ mut Ipub fn get_ref(&self) -> &St
[src]
pub fn get_ref(&self) -> &St
Acquires a reference to the underlying stream that this combinator is pulling from.
ⓘImportant traits for &'_ mut Ipub fn get_mut(&mut self) -> &mut St
[src]
pub fn get_mut(&mut self) -> &mut St
Acquires a mutable reference to the underlying stream that this combinator is pulling from.
Note that care must be taken to avoid tampering with the state of the stream which may otherwise confuse this combinator.
pub fn into_inner(self) -> St
[src]
pub fn into_inner(self) -> St
Consumes this combinator, returning the underlying stream.
Note that this may discard intermediate state of this combinator, so care should be taken to avoid losing resources when this is called.
Trait Implementations
impl<St: Debug> Debug for Flatten<St> where
St: Stream,
St::Item: Debug,
[src]
impl<St: Debug> Debug for Flatten<St> where
St: Stream,
St::Item: Debug,
fn fmt(&self, f: &mut Formatter) -> Result
[src]
fn fmt(&self, f: &mut Formatter) -> Result
Formats the value using the given formatter. Read more
impl<St: Stream> Unpin for Flatten<St> where
St: Stream + Unpin,
St::Item: Stream + Unpin,
[src]
impl<St: Stream> Unpin for Flatten<St> where
St: Stream + Unpin,
St::Item: Stream + Unpin,
impl<St> Stream for Flatten<St> where
St: Stream,
St::Item: Stream,
[src]
impl<St> Stream for Flatten<St> where
St: Stream,
St::Item: Stream,
type Item = <St::Item as Stream>::Item
Values yielded by the stream.
fn poll_next(self: Pin<&mut Self>, lw: &LocalWaker) -> Poll<Option<Self::Item>>
[src]
fn poll_next(self: Pin<&mut Self>, lw: &LocalWaker) -> Poll<Option<Self::Item>>
Attempt to pull out the next value of this stream, registering the current task for wakeup if the value is not yet available, and returning None
if the stream is exhausted. Read more
Auto Trait Implementations
impl<St> Send for Flatten<St> where
St: Send,
<St as Stream>::Item: Send,
impl<St> Send for Flatten<St> where
St: Send,
<St as Stream>::Item: Send,
impl<St> Sync for Flatten<St> where
St: Sync,
<St as Stream>::Item: Sync,
impl<St> Sync for Flatten<St> where
St: Sync,
<St as Stream>::Item: Sync,
Blanket Implementations
impl<T> StreamExt for T where
T: Stream + ?Sized,
[src]
impl<T> StreamExt for T where
T: Stream + ?Sized,
fn next(&mut self) -> Next<Self> where
Self: Sized + Unpin,
[src]
fn next(&mut self) -> Next<Self> where
Self: Sized + Unpin,
Creates a future that resolves to the next item in the stream. Read more
fn into_future(self) -> StreamFuture<Self> where
Self: Sized + Unpin,
[src]
fn into_future(self) -> StreamFuture<Self> where
Self: Sized + Unpin,
Converts this stream into a future of (next_item, tail_of_stream)
. If the stream terminates, then the next item is None
. Read more
fn map<T, F>(self, f: F) -> Map<Self, F> where
F: FnMut(Self::Item) -> T,
Self: Sized,
[src]
fn map<T, F>(self, f: F) -> Map<Self, F> where
F: FnMut(Self::Item) -> T,
Self: Sized,
Maps this stream's items to a different type, returning a new stream of the resulting type. Read more
fn filter<Fut, F>(self, f: F) -> Filter<Self, Fut, F> where
F: FnMut(&Self::Item) -> Fut,
Fut: Future<Output = bool>,
Self: Sized,
[src]
fn filter<Fut, F>(self, f: F) -> Filter<Self, Fut, F> where
F: FnMut(&Self::Item) -> Fut,
Fut: Future<Output = bool>,
Self: Sized,
Filters the values produced by this stream according to the provided asynchronous predicate. Read more
fn filter_map<Fut, T, F>(self, f: F) -> FilterMap<Self, Fut, F> where
F: FnMut(Self::Item) -> Fut,
Fut: Future<Output = Option<T>>,
Self: Sized,
[src]
fn filter_map<Fut, T, F>(self, f: F) -> FilterMap<Self, Fut, F> where
F: FnMut(Self::Item) -> Fut,
Fut: Future<Output = Option<T>>,
Self: Sized,
Filters the values produced by this stream while simultaneously mapping them to a different type according to the provided asynchronous closure. Read more
fn then<Fut, F>(self, f: F) -> Then<Self, Fut, F> where
F: FnMut(Self::Item) -> Fut,
Fut: Future,
Self: Sized,
[src]
fn then<Fut, F>(self, f: F) -> Then<Self, Fut, F> where
F: FnMut(Self::Item) -> Fut,
Fut: Future,
Self: Sized,
Computes from this stream's items new items of a different type using an asynchronous closure. Read more
fn collect<C: Default + Extend<Self::Item>>(self) -> Collect<Self, C> where
Self: Sized,
[src]
fn collect<C: Default + Extend<Self::Item>>(self) -> Collect<Self, C> where
Self: Sized,
Collect all of the values of this stream into a vector, returning a future representing the result of that computation. Read more
fn concat(self) -> Concat<Self> where
Self: Sized,
Self::Item: Extend<<Self::Item as IntoIterator>::Item> + IntoIterator + Default,
[src]
fn concat(self) -> Concat<Self> where
Self: Sized,
Self::Item: Extend<<Self::Item as IntoIterator>::Item> + IntoIterator + Default,
Concatenate all items of a stream into a single extendable destination, returning a future representing the end result. Read more
fn fold<T, Fut, F>(self, init: T, f: F) -> Fold<Self, Fut, T, F> where
F: FnMut(T, Self::Item) -> Fut,
Fut: Future<Output = T>,
Self: Sized,
[src]
fn fold<T, Fut, F>(self, init: T, f: F) -> Fold<Self, Fut, T, F> where
F: FnMut(T, Self::Item) -> Fut,
Fut: Future<Output = T>,
Self: Sized,
Execute an accumulating asynchronous computation over a stream, collecting all the values into one final result. Read more
fn flatten(self) -> Flatten<Self> where
Self::Item: Stream,
Self: Sized,
[src]
fn flatten(self) -> Flatten<Self> where
Self::Item: Stream,
Self: Sized,
Flattens a stream of streams into just one continuous stream. Read more
fn skip_while<Fut, F>(self, f: F) -> SkipWhile<Self, Fut, F> where
F: FnMut(&Self::Item) -> Fut,
Fut: Future<Output = bool>,
Self: Sized,
[src]
fn skip_while<Fut, F>(self, f: F) -> SkipWhile<Self, Fut, F> where
F: FnMut(&Self::Item) -> Fut,
Fut: Future<Output = bool>,
Self: Sized,
Skip elements on this stream while the provided asynchronous predicate resolves to true
. Read more
fn take_while<Fut, F>(self, f: F) -> TakeWhile<Self, Fut, F> where
F: FnMut(&Self::Item) -> Fut,
Fut: Future<Output = bool>,
Self: Sized,
[src]
fn take_while<Fut, F>(self, f: F) -> TakeWhile<Self, Fut, F> where
F: FnMut(&Self::Item) -> Fut,
Fut: Future<Output = bool>,
Self: Sized,
Take elements from this stream while the provided asynchronous predicate resolves to true
. Read more
fn for_each<Fut, F>(self, f: F) -> ForEach<Self, Fut, F> where
F: FnMut(Self::Item) -> Fut,
Fut: Future<Output = ()>,
Self: Sized,
[src]
fn for_each<Fut, F>(self, f: F) -> ForEach<Self, Fut, F> where
F: FnMut(Self::Item) -> Fut,
Fut: Future<Output = ()>,
Self: Sized,
Runs this stream to completion, executing the provided asynchronous closure for each element on the stream. Read more
fn for_each_concurrent<Fut, F>(
self,
limit: impl Into<Option<usize>>,
f: F
) -> ForEachConcurrent<Self, Fut, F> where
F: FnMut(Self::Item) -> Fut,
Fut: Future<Output = ()>,
Self: Sized,
[src]
fn for_each_concurrent<Fut, F>(
self,
limit: impl Into<Option<usize>>,
f: F
) -> ForEachConcurrent<Self, Fut, F> where
F: FnMut(Self::Item) -> Fut,
Fut: Future<Output = ()>,
Self: Sized,
Runs this stream to completion, executing the provided asynchronous closure for each element on the stream concurrently as elements become available. Read more
fn take(self, n: u64) -> Take<Self> where
Self: Sized,
[src]
fn take(self, n: u64) -> Take<Self> where
Self: Sized,
Creates a new stream of at most n
items of the underlying stream. Read more
fn skip(self, n: u64) -> Skip<Self> where
Self: Sized,
[src]
fn skip(self, n: u64) -> Skip<Self> where
Self: Sized,
Creates a new stream which skips n
items of the underlying stream. Read more
fn fuse(self) -> Fuse<Self> where
Self: Sized,
[src]
fn fuse(self) -> Fuse<Self> where
Self: Sized,
Fuse a stream such that poll_next
will never again be called once it has finished. Read more
ⓘImportant traits for &'_ mut Ifn by_ref(&mut self) -> &mut Self where
Self: Sized,
[src]
fn by_ref(&mut self) -> &mut Self where
Self: Sized,
Borrows a stream, rather than consuming it. Read more
fn catch_unwind(self) -> CatchUnwind<Self> where
Self: Sized + UnwindSafe,
[src]
fn catch_unwind(self) -> CatchUnwind<Self> where
Self: Sized + UnwindSafe,
Catches unwinding panics while polling the stream. Read more
fn boxed(self) -> Pin<Box<Self>> where
Self: Sized,
[src]
fn boxed(self) -> Pin<Box<Self>> where
Self: Sized,
Wrap the stream in a Box, pinning it.
fn buffered(self, n: usize) -> Buffered<Self> where
Self::Item: Future,
Self: Sized,
[src]
fn buffered(self, n: usize) -> Buffered<Self> where
Self::Item: Future,
Self: Sized,
An adaptor for creating a buffered list of pending futures. Read more
fn buffer_unordered(self, n: usize) -> BufferUnordered<Self> where
Self::Item: Future,
Self: Sized,
[src]
fn buffer_unordered(self, n: usize) -> BufferUnordered<Self> where
Self::Item: Future,
Self: Sized,
An adaptor for creating a buffered list of pending futures (unordered). Read more
fn zip<St>(self, other: St) -> Zip<Self, St> where
St: Stream,
Self: Sized,
[src]
fn zip<St>(self, other: St) -> Zip<Self, St> where
St: Stream,
Self: Sized,
An adapter for zipping two streams together. Read more
fn chain<St>(self, other: St) -> Chain<Self, St> where
St: Stream<Item = Self::Item>,
Self: Sized,
[src]
fn chain<St>(self, other: St) -> Chain<Self, St> where
St: Stream<Item = Self::Item>,
Self: Sized,
Adapter for chaining two stream. Read more
fn peekable(self) -> Peekable<Self> where
Self: Sized,
[src]
fn peekable(self) -> Peekable<Self> where
Self: Sized,
Creates a new stream which exposes a peek
method. Read more
fn chunks(self, capacity: usize) -> Chunks<Self> where
Self: Sized,
[src]
fn chunks(self, capacity: usize) -> Chunks<Self> where
Self: Sized,
An adaptor for chunking up items of the stream inside a vector. Read more
fn select<St>(self, other: St) -> Select<Self, St> where
St: Stream<Item = Self::Item>,
Self: Sized,
[src]
fn select<St>(self, other: St) -> Select<Self, St> where
St: Stream<Item = Self::Item>,
Self: Sized,
This combinator will attempt to pull items from both streams. Each stream will be polled in a round-robin fashion, and whenever a stream is ready to yield an item that item is yielded. Read more
fn forward<S>(self, sink: S) -> Forward<Self, S> where
S: Sink + Unpin,
Self: Stream<Item = Result<S::SinkItem, S::SinkError>> + Sized,
[src]
fn forward<S>(self, sink: S) -> Forward<Self, S> where
S: Sink + Unpin,
Self: Stream<Item = Result<S::SinkItem, S::SinkError>> + Sized,
A future that completes after the given stream has been fully processed into the sink, including flushing. Read more
fn split(self) -> (SplitSink<Self>, SplitStream<Self>) where
Self: Sink + Sized,
[src]
fn split(self) -> (SplitSink<Self>, SplitStream<Self>) where
Self: Sink + Sized,
Splits this Stream + Sink
object into separate Stream
and Sink
objects. Read more
fn inspect<F>(self, f: F) -> Inspect<Self, F> where
F: FnMut(&Self::Item),
Self: Sized,
[src]
fn inspect<F>(self, f: F) -> Inspect<Self, F> where
F: FnMut(&Self::Item),
Self: Sized,
Do something with each item of this stream, afterwards passing it on. Read more
ⓘImportant traits for Either<L, R>fn left_stream<B>(self) -> Either<Self, B> where
B: Stream<Item = Self::Item>,
Self: Sized,
[src]
fn left_stream<B>(self) -> Either<Self, B> where
B: Stream<Item = Self::Item>,
Self: Sized,
Wrap this stream in an Either
stream, making it the left-hand variant of that Either
. Read more
ⓘImportant traits for Either<L, R>fn right_stream<B>(self) -> Either<B, Self> where
B: Stream<Item = Self::Item>,
Self: Sized,
[src]
fn right_stream<B>(self) -> Either<B, Self> where
B: Stream<Item = Self::Item>,
Self: Sized,
Wrap this stream in an Either
stream, making it the right-hand variant of that Either
. Read more
fn poll_next_unpin(&mut self, lw: &LocalWaker) -> Poll<Option<Self::Item>> where
Self: Unpin + Sized,
[src]
fn poll_next_unpin(&mut self, lw: &LocalWaker) -> Poll<Option<Self::Item>> where
Self: Unpin + Sized,
A convenience method for calling Stream::poll_next
on Unpin
stream types. Read more
impl<S> TryStreamExt for S where
S: TryStream,
[src]
impl<S> TryStreamExt for S where
S: TryStream,
fn err_into<E>(self) -> ErrInto<Self, E> where
Self: Sized,
Self::Error: Into<E>,
[src]
fn err_into<E>(self) -> ErrInto<Self, E> where
Self: Sized,
Self::Error: Into<E>,
Wraps the current stream in a new stream which converts the error type into the one provided. Read more
fn map_ok<T, F>(self, f: F) -> MapOk<Self, F> where
Self: Sized,
F: FnMut(Self::Ok) -> T,
[src]
fn map_ok<T, F>(self, f: F) -> MapOk<Self, F> where
Self: Sized,
F: FnMut(Self::Ok) -> T,
Wraps the current stream in a new stream which maps the success value using the provided closure. Read more
fn map_err<E, F>(self, f: F) -> MapErr<Self, F> where
Self: Sized,
F: FnMut(Self::Error) -> E,
[src]
fn map_err<E, F>(self, f: F) -> MapErr<Self, F> where
Self: Sized,
F: FnMut(Self::Error) -> E,
Wraps the current stream in a new stream which maps the error value using the provided closure. Read more
fn into_stream(self) -> IntoStream<Self> where
Self: Sized,
[src]
fn into_stream(self) -> IntoStream<Self> where
Self: Sized,
fn try_next(&mut self) -> TryNext<Self> where
Self: Sized + Unpin,
[src]
fn try_next(&mut self) -> TryNext<Self> where
Self: Sized + Unpin,
Creates a future that attempts to resolve the next item in the stream. If an error is encountered before the next item, the error is returned instead. Read more
fn try_for_each<Fut, F>(self, f: F) -> TryForEach<Self, Fut, F> where
F: FnMut(Self::Ok) -> Fut,
Fut: TryFuture<Ok = (), Error = Self::Error>,
Self: Sized,
[src]
fn try_for_each<Fut, F>(self, f: F) -> TryForEach<Self, Fut, F> where
F: FnMut(Self::Ok) -> Fut,
Fut: TryFuture<Ok = (), Error = Self::Error>,
Self: Sized,
Attempts to run this stream to completion, executing the provided asynchronous closure for each element on the stream. Read more
fn try_skip_while<Fut, F>(self, f: F) -> TrySkipWhile<Self, Fut, F> where
F: FnMut(&Self::Ok) -> Fut,
Fut: TryFuture<Ok = bool, Error = Self::Error>,
Self: Sized,
[src]
fn try_skip_while<Fut, F>(self, f: F) -> TrySkipWhile<Self, Fut, F> where
F: FnMut(&Self::Ok) -> Fut,
Fut: TryFuture<Ok = bool, Error = Self::Error>,
Self: Sized,
Skip elements on this stream while the provided asynchronous predicate resolves to true
. Read more
fn try_for_each_concurrent<Fut, F>(
self,
limit: impl Into<Option<usize>>,
f: F
) -> TryForEachConcurrent<Self, Fut, F> where
F: FnMut(Self::Ok) -> Fut,
Fut: Future<Output = Result<(), Self::Error>>,
Self: Sized,
[src]
fn try_for_each_concurrent<Fut, F>(
self,
limit: impl Into<Option<usize>>,
f: F
) -> TryForEachConcurrent<Self, Fut, F> where
F: FnMut(Self::Ok) -> Fut,
Fut: Future<Output = Result<(), Self::Error>>,
Self: Sized,
Attempts to run this stream to completion, executing the provided asynchronous closure for each element on the stream concurrently as elements become available, exiting as soon as an error occurs. Read more
fn try_collect<C: Default + Extend<Self::Ok>>(self) -> TryCollect<Self, C> where
Self: Sized,
[src]
fn try_collect<C: Default + Extend<Self::Ok>>(self) -> TryCollect<Self, C> where
Self: Sized,
Attempt to Collect all of the values of this stream into a vector, returning a future representing the result of that computation. Read more
fn try_filter_map<Fut, F, T>(self, f: F) -> TryFilterMap<Self, Fut, F> where
Fut: TryFuture<Ok = Option<T>, Error = Self::Error>,
F: FnMut(Self::Ok) -> Fut,
Self: Sized,
[src]
fn try_filter_map<Fut, F, T>(self, f: F) -> TryFilterMap<Self, Fut, F> where
Fut: TryFuture<Ok = Option<T>, Error = Self::Error>,
F: FnMut(Self::Ok) -> Fut,
Self: Sized,
Attempt to filter the values produced by this stream while simultaneously mapping them to a different type according to the provided asynchronous closure. Read more
fn try_fold<T, Fut, F>(self, init: T, f: F) -> TryFold<Self, Fut, T, F> where
F: FnMut(T, Self::Ok) -> Fut,
Fut: TryFuture<Ok = T, Error = Self::Error>,
Self: Sized,
[src]
fn try_fold<T, Fut, F>(self, init: T, f: F) -> TryFold<Self, Fut, T, F> where
F: FnMut(T, Self::Ok) -> Fut,
Fut: TryFuture<Ok = T, Error = Self::Error>,
Self: Sized,
Attempt to execute an accumulating asynchronous computation over a stream, collecting all the values into one final result. Read more
fn try_buffer_unordered(self, n: usize) -> TryBufferUnordered<Self> where
Self::Ok: TryFuture<Error = Self::Error>,
Self: Sized,
[src]
fn try_buffer_unordered(self, n: usize) -> TryBufferUnordered<Self> where
Self::Ok: TryFuture<Error = Self::Error>,
Self: Sized,
Attempt to execute several futures from a stream concurrently. Read more
ⓘImportant traits for Compat<W>fn compat(self) -> Compat<Self> where
Self: Sized + Unpin,
[src]
fn compat(self) -> Compat<Self> where
Self: Sized + Unpin,
impl<T, U> Into for T where
U: From<T>,
[src]
impl<T, U> Into for T where
U: From<T>,
impl<T> From for T
[src]
impl<T> From for T
impl<T, U> TryFrom for T where
T: From<U>,
[src]
impl<T, U> TryFrom for T where
T: From<U>,
type Error = !
try_from
)The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
try_from
)Performs the conversion.
impl<T> Borrow for T where
T: ?Sized,
[src]
impl<T> Borrow for T where
T: ?Sized,
ⓘImportant traits for &'_ mut Ifn borrow(&self) -> &T
[src]
fn borrow(&self) -> &T
Immutably borrows from an owned value. Read more
impl<T> Any for T where
T: 'static + ?Sized,
[src]
impl<T> Any for T where
T: 'static + ?Sized,
fn get_type_id(&self) -> TypeId
[src]
fn get_type_id(&self) -> TypeId
🔬 This is a nightly-only experimental API. (get_type_id
)
this method will likely be replaced by an associated static
Gets the TypeId
of self
. Read more
impl<T> BorrowMut for T where
T: ?Sized,
[src]
impl<T> BorrowMut for T where
T: ?Sized,
ⓘImportant traits for &'_ mut Ifn borrow_mut(&mut self) -> &mut T
[src]
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
try_from
)The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
try_from
)Performs the conversion.
impl<S, T, E> TryStream for S where
S: Stream<Item = Result<T, E>>,
[src]
impl<S, T, E> TryStream for S where
S: Stream<Item = Result<T, E>>,
type Ok = T
The type of successful values yielded by this future
type Error = E
The type of failures yielded by this future
fn try_poll_next(
self: Pin<&mut S>,
lw: &LocalWaker
) -> Poll<Option<Result<<S as TryStream>::Ok, <S as TryStream>::Error>>>
[src]
fn try_poll_next(
self: Pin<&mut S>,
lw: &LocalWaker
) -> Poll<Option<Result<<S as TryStream>::Ok, <S as TryStream>::Error>>>
Poll this TryStream
as if it were a Stream
. Read more