[−][src]Struct futures_executor::BlockingStream
An iterator which blocks on values from a stream until they become available.
Methods
impl<S: Stream + Unpin> BlockingStream<S>
[src]
pub fn into_inner(self) -> S
[src]
Convert this BlockingStream
into the inner Stream
type.
Trait Implementations
impl<S: Stream + Unpin> Iterator for BlockingStream<S>
[src]
type Item = S::Item
The type of the elements being iterated over.
fn next(&mut self) -> Option<Self::Item>
[src]
default fn size_hint(&self) -> (usize, Option<usize>)
1.0.0[src]
Returns the bounds on the remaining length of the iterator. Read more
default fn count(self) -> usize
1.0.0[src]
Consumes the iterator, counting the number of iterations and returning it. Read more
default fn last(self) -> Option<Self::Item>
1.0.0[src]
Consumes the iterator, returning the last element. Read more
default fn nth(&mut self, n: usize) -> Option<Self::Item>
1.0.0[src]
Returns the n
th element of the iterator. Read more
default fn step_by(self, step: usize) -> StepBy<Self>
1.28.0[src]
Creates an iterator starting at the same point, but stepping by the given amount at each iteration. Read more
default fn chain<U>(
self,
other: U
) -> Chain<Self, <U as IntoIterator>::IntoIter> where
U: IntoIterator<Item = Self::Item>,
1.0.0[src]
self,
other: U
) -> Chain<Self, <U as IntoIterator>::IntoIter> where
U: IntoIterator<Item = Self::Item>,
Takes two iterators and creates a new iterator over both in sequence. Read more
default fn zip<U>(self, other: U) -> Zip<Self, <U as IntoIterator>::IntoIter> where
U: IntoIterator,
1.0.0[src]
U: IntoIterator,
'Zips up' two iterators into a single iterator of pairs. Read more
default fn map<B, F>(self, f: F) -> Map<Self, F> where
F: FnMut(Self::Item) -> B,
1.0.0[src]
F: FnMut(Self::Item) -> B,
Takes a closure and creates an iterator which calls that closure on each element. Read more
default fn for_each<F>(self, f: F) where
F: FnMut(Self::Item),
1.21.0[src]
F: FnMut(Self::Item),
Calls a closure on each element of an iterator. Read more
default fn filter<P>(self, predicate: P) -> Filter<Self, P> where
P: FnMut(&Self::Item) -> bool,
1.0.0[src]
P: FnMut(&Self::Item) -> bool,
Creates an iterator which uses a closure to determine if an element should be yielded. Read more
default fn filter_map<B, F>(self, f: F) -> FilterMap<Self, F> where
F: FnMut(Self::Item) -> Option<B>,
1.0.0[src]
F: FnMut(Self::Item) -> Option<B>,
Creates an iterator that both filters and maps. Read more
default fn enumerate(self) -> Enumerate<Self>
1.0.0[src]
Creates an iterator which gives the current iteration count as well as the next value. Read more
default fn peekable(self) -> Peekable<Self>
1.0.0[src]
Creates an iterator which can use peek
to look at the next element of the iterator without consuming it. Read more
default fn skip_while<P>(self, predicate: P) -> SkipWhile<Self, P> where
P: FnMut(&Self::Item) -> bool,
1.0.0[src]
P: FnMut(&Self::Item) -> bool,
Creates an iterator that [skip
]s elements based on a predicate. Read more
default fn take_while<P>(self, predicate: P) -> TakeWhile<Self, P> where
P: FnMut(&Self::Item) -> bool,
1.0.0[src]
P: FnMut(&Self::Item) -> bool,
Creates an iterator that yields elements based on a predicate. Read more
default fn skip(self, n: usize) -> Skip<Self>
1.0.0[src]
Creates an iterator that skips the first n
elements. Read more
default fn take(self, n: usize) -> Take<Self>
1.0.0[src]
Creates an iterator that yields its first n
elements. Read more
default fn scan<St, B, F>(self, initial_state: St, f: F) -> Scan<Self, St, F> where
F: FnMut(&mut St, Self::Item) -> Option<B>,
1.0.0[src]
F: FnMut(&mut St, Self::Item) -> Option<B>,
An iterator adaptor similar to [fold
] that holds internal state and produces a new iterator. Read more
default fn flat_map<U, F>(self, f: F) -> FlatMap<Self, U, F> where
F: FnMut(Self::Item) -> U,
U: IntoIterator,
1.0.0[src]
F: FnMut(Self::Item) -> U,
U: IntoIterator,
Creates an iterator that works like map, but flattens nested structure. Read more
default fn flatten(self) -> Flatten<Self> where
Self::Item: IntoIterator,
1.29.0[src]
Self::Item: IntoIterator,
Creates an iterator that flattens nested structure. Read more
default fn fuse(self) -> Fuse<Self>
1.0.0[src]
Creates an iterator which ends after the first [None
]. Read more
default fn inspect<F>(self, f: F) -> Inspect<Self, F> where
F: FnMut(&Self::Item),
1.0.0[src]
F: FnMut(&Self::Item),
Do something with each element of an iterator, passing the value on. Read more
default fn by_ref(&mut self) -> &mut Self
1.0.0[src]
Borrows an iterator, rather than consuming it. Read more
#[must_use = "if you really need to exhaust the iterator, consider `.for_each(drop)` instead"]
default fn collect<B>(self) -> B where
B: FromIterator<Self::Item>,
1.0.0[src]
B: FromIterator<Self::Item>,
Transforms an iterator into a collection. Read more
default fn partition<B, F>(self, f: F) -> (B, B) where
B: Default + Extend<Self::Item>,
F: FnMut(&Self::Item) -> bool,
1.0.0[src]
B: Default + Extend<Self::Item>,
F: FnMut(&Self::Item) -> bool,
Consumes an iterator, creating two collections from it. Read more
default fn try_fold<B, F, R>(&mut self, init: B, f: F) -> R where
F: FnMut(B, Self::Item) -> R,
R: Try<Ok = B>,
1.27.0[src]
F: FnMut(B, Self::Item) -> R,
R: Try<Ok = B>,
An iterator method that applies a function as long as it returns successfully, producing a single, final value. Read more
default fn try_for_each<F, R>(&mut self, f: F) -> R where
F: FnMut(Self::Item) -> R,
R: Try<Ok = ()>,
1.27.0[src]
F: FnMut(Self::Item) -> R,
R: Try<Ok = ()>,
An iterator method that applies a fallible function to each item in the iterator, stopping at the first error and returning that error. Read more
default fn fold<B, F>(self, init: B, f: F) -> B where
F: FnMut(B, Self::Item) -> B,
1.0.0[src]
F: FnMut(B, Self::Item) -> B,
An iterator method that applies a function, producing a single, final value. Read more
default fn all<F>(&mut self, f: F) -> bool where
F: FnMut(Self::Item) -> bool,
1.0.0[src]
F: FnMut(Self::Item) -> bool,
Tests if every element of the iterator matches a predicate. Read more
default fn any<F>(&mut self, f: F) -> bool where
F: FnMut(Self::Item) -> bool,
1.0.0[src]
F: FnMut(Self::Item) -> bool,
Tests if any element of the iterator matches a predicate. Read more
default fn find<P>(&mut self, predicate: P) -> Option<Self::Item> where
P: FnMut(&Self::Item) -> bool,
1.0.0[src]
P: FnMut(&Self::Item) -> bool,
Searches for an element of an iterator that satisfies a predicate. Read more
default fn find_map<B, F>(&mut self, f: F) -> Option<B> where
F: FnMut(Self::Item) -> Option<B>,
1.30.0[src]
F: FnMut(Self::Item) -> Option<B>,
Applies function to the elements of iterator and returns the first non-none result. Read more
default fn position<P>(&mut self, predicate: P) -> Option<usize> where
P: FnMut(Self::Item) -> bool,
1.0.0[src]
P: FnMut(Self::Item) -> bool,
Searches for an element in an iterator, returning its index. Read more
default fn rposition<P>(&mut self, predicate: P) -> Option<usize> where
P: FnMut(Self::Item) -> bool,
Self: ExactSizeIterator + DoubleEndedIterator,
1.0.0[src]
P: FnMut(Self::Item) -> bool,
Self: ExactSizeIterator + DoubleEndedIterator,
Searches for an element in an iterator from the right, returning its index. Read more
default fn max(self) -> Option<Self::Item> where
Self::Item: Ord,
1.0.0[src]
Self::Item: Ord,
Returns the maximum element of an iterator. Read more
default fn min(self) -> Option<Self::Item> where
Self::Item: Ord,
1.0.0[src]
Self::Item: Ord,
Returns the minimum element of an iterator. Read more
default fn max_by_key<B, F>(self, f: F) -> Option<Self::Item> where
B: Ord,
F: FnMut(&Self::Item) -> B,
1.6.0[src]
B: Ord,
F: FnMut(&Self::Item) -> B,
Returns the element that gives the maximum value from the specified function. Read more
default fn max_by<F>(self, compare: F) -> Option<Self::Item> where
F: FnMut(&Self::Item, &Self::Item) -> Ordering,
1.15.0[src]
F: FnMut(&Self::Item, &Self::Item) -> Ordering,
Returns the element that gives the maximum value with respect to the specified comparison function. Read more
default fn min_by_key<B, F>(self, f: F) -> Option<Self::Item> where
B: Ord,
F: FnMut(&Self::Item) -> B,
1.6.0[src]
B: Ord,
F: FnMut(&Self::Item) -> B,
Returns the element that gives the minimum value from the specified function. Read more
default fn min_by<F>(self, compare: F) -> Option<Self::Item> where
F: FnMut(&Self::Item, &Self::Item) -> Ordering,
1.15.0[src]
F: FnMut(&Self::Item, &Self::Item) -> Ordering,
Returns the element that gives the minimum value with respect to the specified comparison function. Read more
default fn rev(self) -> Rev<Self> where
Self: DoubleEndedIterator,
1.0.0[src]
Self: DoubleEndedIterator,
Reverses an iterator's direction. Read more
default fn unzip<A, B, FromA, FromB>(self) -> (FromA, FromB) where
FromA: Default + Extend<A>,
FromB: Default + Extend<B>,
Self: Iterator<Item = (A, B)>,
1.0.0[src]
FromA: Default + Extend<A>,
FromB: Default + Extend<B>,
Self: Iterator<Item = (A, B)>,
Converts an iterator of pairs into a pair of containers. Read more
default fn copied<'a, T>(self) -> Copied<Self> where
Self: Iterator<Item = &'a T>,
T: 'a + Copy,
[src]
Self: Iterator<Item = &'a T>,
T: 'a + Copy,
iter_copied
)Creates an iterator which copies all of its elements. Read more
default fn cloned<'a, T>(self) -> Cloned<Self> where
Self: Iterator<Item = &'a T>,
T: 'a + Clone,
1.0.0[src]
Self: Iterator<Item = &'a T>,
T: 'a + Clone,
Creates an iterator which [clone
]s all of its elements. Read more
default fn cycle(self) -> Cycle<Self> where
Self: Clone,
1.0.0[src]
Self: Clone,
Repeats an iterator endlessly. Read more
default fn sum<S>(self) -> S where
S: Sum<Self::Item>,
1.11.0[src]
S: Sum<Self::Item>,
Sums the elements of an iterator. Read more
default fn product<P>(self) -> P where
P: Product<Self::Item>,
1.11.0[src]
P: Product<Self::Item>,
Iterates over the entire iterator, multiplying all the elements Read more
default fn cmp<I>(self, other: I) -> Ordering where
I: IntoIterator<Item = Self::Item>,
Self::Item: Ord,
1.5.0[src]
I: IntoIterator<Item = Self::Item>,
Self::Item: Ord,
Lexicographically compares the elements of this Iterator
with those of another. Read more
default fn partial_cmp<I>(self, other: I) -> Option<Ordering> where
I: IntoIterator,
Self::Item: PartialOrd<<I as IntoIterator>::Item>,
1.5.0[src]
I: IntoIterator,
Self::Item: PartialOrd<<I as IntoIterator>::Item>,
Lexicographically compares the elements of this Iterator
with those of another. Read more
default fn eq<I>(self, other: I) -> bool where
I: IntoIterator,
Self::Item: PartialEq<<I as IntoIterator>::Item>,
1.5.0[src]
I: IntoIterator,
Self::Item: PartialEq<<I as IntoIterator>::Item>,
Determines if the elements of this Iterator
are equal to those of another. Read more
default fn ne<I>(self, other: I) -> bool where
I: IntoIterator,
Self::Item: PartialEq<<I as IntoIterator>::Item>,
1.5.0[src]
I: IntoIterator,
Self::Item: PartialEq<<I as IntoIterator>::Item>,
Determines if the elements of this Iterator
are unequal to those of another. Read more
default fn lt<I>(self, other: I) -> bool where
I: IntoIterator,
Self::Item: PartialOrd<<I as IntoIterator>::Item>,
1.5.0[src]
I: IntoIterator,
Self::Item: PartialOrd<<I as IntoIterator>::Item>,
Determines if the elements of this Iterator
are lexicographically less than those of another. Read more
default fn le<I>(self, other: I) -> bool where
I: IntoIterator,
Self::Item: PartialOrd<<I as IntoIterator>::Item>,
1.5.0[src]
I: IntoIterator,
Self::Item: PartialOrd<<I as IntoIterator>::Item>,
Determines if the elements of this Iterator
are lexicographically less or equal to those of another. Read more
default fn gt<I>(self, other: I) -> bool where
I: IntoIterator,
Self::Item: PartialOrd<<I as IntoIterator>::Item>,
1.5.0[src]
I: IntoIterator,
Self::Item: PartialOrd<<I as IntoIterator>::Item>,
Determines if the elements of this Iterator
are lexicographically greater than those of another. Read more
default fn ge<I>(self, other: I) -> bool where
I: IntoIterator,
Self::Item: PartialOrd<<I as IntoIterator>::Item>,
1.5.0[src]
I: IntoIterator,
Self::Item: PartialOrd<<I as IntoIterator>::Item>,
Determines if the elements of this Iterator
are lexicographically greater than or equal to those of another. Read more
default fn is_sorted(self) -> bool where
Self::Item: PartialOrd<Self::Item>,
[src]
Self::Item: PartialOrd<Self::Item>,
🔬 This is a nightly-only experimental API. (is_sorted
)
new API
Checks if the elements of this iterator are sorted. Read more
default fn is_sorted_by<F>(self, compare: F) -> bool where
F: FnMut(&Self::Item, &Self::Item) -> Option<Ordering>,
[src]
F: FnMut(&Self::Item, &Self::Item) -> Option<Ordering>,
🔬 This is a nightly-only experimental API. (is_sorted
)
new API
Checks if the elements of this iterator are sorted using the given comparator function. Read more
default fn is_sorted_by_key<F, K>(self, f: F) -> bool where
F: FnMut(&Self::Item) -> K,
K: PartialOrd<K>,
[src]
F: FnMut(&Self::Item) -> K,
K: PartialOrd<K>,
🔬 This is a nightly-only experimental API. (is_sorted
)
new API
Checks if the elements of this iterator are sorted using the given key extraction function. Read more
impl<S: Debug + Stream + Unpin> Debug for BlockingStream<S>
[src]
impl<S: Stream + Unpin> Deref for BlockingStream<S>
[src]
impl<S: Stream + Unpin> DerefMut for BlockingStream<S>
[src]
Auto Trait Implementations
impl<S> Send for BlockingStream<S> where
S: Send,
S: Send,
impl<S> Sync for BlockingStream<S> where
S: Sync,
S: Sync,
Blanket Implementations
impl<T> From for T
[src]
impl<I> IntoIterator for I where
I: Iterator,
[src]
I: Iterator,
type Item = <I as Iterator>::Item
The type of the elements being iterated over.
type IntoIter = I
Which kind of iterator are we turning this into?
fn into_iter(self) -> I
[src]
impl<T, U> Into for T where
U: From<T>,
[src]
U: From<T>,
impl<T, U> TryFrom for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T> Borrow for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<I> IteratorRandom for I where
I: Iterator,
[src]
I: Iterator,
default fn choose<R>(self, rng: &mut R) -> Option<Self::Item> where
R: Rng + ?Sized,
[src]
R: Rng + ?Sized,
Choose one element at random from the iterator. If you have a slice, it's significantly faster to call the [choose
] or [choose_mut
] functions using the slice instead. Read more
default fn choose_multiple_fill<R>(
self,
rng: &mut R,
buf: &mut [Self::Item]
) -> usize where
R: Rng + ?Sized,
[src]
self,
rng: &mut R,
buf: &mut [Self::Item]
) -> usize where
R: Rng + ?Sized,
Collects amount
values at random from the iterator into a supplied buffer. Read more
default fn choose_multiple<R>(
self,
rng: &mut R,
amount: usize
) -> Vec<Self::Item> where
R: Rng + ?Sized,
[src]
self,
rng: &mut R,
amount: usize
) -> Vec<Self::Item> where
R: Rng + ?Sized,
Collects amount
values at random from the iterator into a vector. Read more